Review of Ampeg Portaflex PF350 & PF115HE -
Ampeg, those stalwarts of the bass amplification world, have come
up with an intriguing combination here - a blend of new lightweight
amplifier technology and vintage design stylings, to provide with a
novel answer to an age-old question with bass rigs. How exactly do
you make your backline powerful, yet light in weight and easy to
store or manoeuvre?
The PF350 amplifier head and PF115HE Flip-Top cabinet are part
of the 'Portaflex range'. Ampeg's ethos is to take the vintage
stylings of the original and iconic flip-top range (B-15 anyone?)
and marry-up the vintage stylings with powerful amplification to
create a portable and affordable range of kit.
In the Portaflex range are two amplifier heads, The PF350 and
PF500 (350W and 500W - an uprated version with more functionality)
two flip top cabinets, a 1x15 reviewed here and a 2x10 and finally
two 'LF' ported cabinets (no flip top) 4x10 and 1x15.
Weighing in at 3.6Kg, the PF350 head is not the lightest of D
Class amplifiers on the market, but is still incredibly light for
its output power. There was one thing that I really like about this
head straight away and it's something maybe a few other
manufacturers have missed - the fact that our bass gear needs to be
able to withstand a beating on the road in pubs, clubs and wherever
our bass takes us! The steel chassis, although adding to the total
mass of the unit, is substantial and goes along with the hard
wearing paint job. It looks like it will take some serious scrapes
before even the paint gives way. It's one thing to try to make the
lightest amp on the market, but there's a point where something,
such as chassis integrity is compromised. Ampeg seem to recognise
this with a beefy shell!
So that's the casing looked at, time to move on to the controls
and configuration of the head. It really couldn't be any simpler
and that's a good thing for the gigging musician. The most
important features are right there where we need them. The head
features a solid state pre-amplifier for tone shaping, hooked up to
the D Class power amplifier. A three band EQ providing cut and
boost of the Bass, Middle and Treble frequencies is flanked either
side by the Gain control on the left hand side for setting the
optimal input level and the Master Volume on the right, for the
output level. To the right hand side of the input socket
there is a -15dB pad switch that attenuates the input level from
say, an active bass with a high output that could 'clip' the input
preamp into distorting which can be undesirable - unless that's
what you are looking for of course! It's quite possible to add a
bit of drive and bite by pushing the gain control up higher, though
you may find it's able to create some ugly sounds from the
pre-amplifier too if you overcook it some. Finally over on the
right hand side of the front panel there is a limiter defeat switch
and an LED to show you (when activated) that the limiter is kicking
in. The limiter stops the power amplifier from overloading and
prevents potential distortion when activated. If you are playing a
loud enough gig, it's possible to 'ride' the limiter so it acts a
bit like a valve amplifier starting to compress. Thankfully without
the back-break of lugging an SVT 2 Pro around!
Next to the limiter button is an LED marked 'Fault'. The
amplifier features a safety cut-out switch so, should the power
amplifier overheat due to driving it too hard, inadequate air be
circulating or if you are running too low a load in terms of
speaker cabinets connected the amp will switch itself off rather
than start to glow.
Topping off the features is a handy 3.5mm stereo line-in for
connecting an MP3 player or other device to play along with.
There's also a 3.5mm stereo earphone socket too, so you can play
your bass along to stereo input material. It's these little things
that set this amplifier apart from others! For silent rehearsal,
Ampeg say that it is safe to remove the speaker lead and operate
the head without a cabinet. This would be very good for using in a
studio where you might not need to mic a cabinet but want to make
use of the pre-amplifier and DI facilities.
Around the back of the amplifier it's a tidy affair. The left
side features the usual IEC power socket input and On/Off power
switch. Another nice addition is the ability to switch the
amplifier from 240V to 110V input for use across the world. This
amplifier fits in a big gig bag, so it's likely it'll travel
easily, far and wide! In the centre of the rear panel a round grill
protecting the cooling fan. Ampeg suggests making sure there is at
least a 6" gap between the back of the amplifier and any possible
obstruction to allow the fan to do its job properly. Next up, are
two sockets for speaker outputs. I have to say I am a little
surprised to see that whereas most companies are adopting the use
of combination Neutrik's SpeakOn outputs, not so on the Ampeg.
Personally, I'd like all speaker outputs to be SpeakOns on bass
amplification. It stops people using instrument cables for speaker
outputs instead of dedicated speaker cables, which is never a good
idea! Instrument cables are not designed to be used for speaker
outputs! Ok, rant over!
Over on the far right hand side, there is an XLR socket for the
D.I. output but there's no earth lift function in this amplifier.
Finally, you have a serial effects loop for external processing.
You could also use the 'send' connection as a line out to another
piece of gear. The master volume does not affect the level at this
output. The 'return' socket can also be a clever way of bypassing
the pre-amplifier and connecting direct to the 350W power
amplifier, should you want to.
Ampeg Portaflex PF115HE 1x15" Flip-Top cabinet.
'Drawing from the classic design of Ampeg's legendary Portaflex
cabinets, the PF-115HE combines vintage styling with the
performance of a modern 450W cabinet featuring a Ceramic Eminence
15" speaker and tweeter.' says Ampeg website - and here's where
things get a little interesting! Not only is the cabinet an easy
one-man-lift and comes with removable wheels (that are stored in a
nice Ampeg bag inside the cabinet) but the vintage flip-top design
of the original vintage B-15 flip-top has been revisited and it's
The top of the cabinet is actually a lid and can be removed
using the four clasps on the cabinet sides. A special mounting kit
is provided so that either the PF350 head or its bigger brother the
PF500 can be attached to the lid. The lid is then reattached to the
cabinet. This in itself is a great idea, as the head certainly
can't slide off, be pushed off, or worse still, sneak out of the
gig tucked under somebody's arm! When the gig is done and it comes
to packing up, the flip top design really shines. Undo the four
catches, flip the lid over and the head, still connected to the lid
stores inside the cabinet safely! Even with the larger PF500 head
and cabinet in this 'combo' configuration, the total weight is
still around 25Kg, which is still lighter than some bass cabinets
The PF115HE is a sealed cabinet with a 450W 8 Ohm 15" speaker
and tweeter. Don't expect earth shaking low end, but this cabinet
will deliver a nice controlled and punchy bass sound to moderately
high volumes for a single cabinet. This will be great for small
club gigs, studio work and monitoring, where large foldback is
available at bigger gigs. Sometimes it is not a good idea to have
too much low end on stage. It can make the sound 'mushy' and a
cabinet like this paired with a second would be great for avoiding
Round the back of the cabinet are two jack sockets wired in
parallel for input from an amplifier and for daisy chaining to
another cabinet, for example a second PF115HE. There is also a
three way switch for setting the level of the tweeter. Either On,
Off or at a -6dB padded level for a reduced treble level.
A few reviews online have suggested that there's more than just
a passing similarity with the tones you can get from the
PF350/PF115HE combination and the original B-15 if you want, though
it has to be said that with the 350W of the PF350, it's unlikely to
break up at the same low volumes as the original B-15. Not
necessarily a bad thing for the modern bass player!
I like this rig a lot. Bass gear takes up a lot of room and we
always need ways of being able to store or move it, especially with
rising travel costs. Some musicians (especially in the UK) are
downsizing to smaller vehicles to save money. For that sort of
user, this set up scores highly.
Ampeg Portaflex PF350 & PF115HE review by Dan Veall in issue 9
Review of Tanglewood TW45 W OP E Acoustic Guitar
Budget to mid-priced acoustics made using real tonewoods...
Review of Vintage Paul Brett 6 String Acoustic Guitar
As with the Vintage Brett 12-string, I...
Review of Faith Venus FVGH-HEX Concert Cutaway
Electro-Acoustic Guitar -
Faith's acoustic and electro-acoustics have consistently impressed...
Review of Breedlove BJ350 CM4 Solo Fretless Acoustic
Just as Dan Veall's Doug Wimbish interview...
Review of Breedlove BJ350 SME4 Studio Fretted Acoustic
Moving on to the second Breedlove bass in...
Musicman Steve Morse Y2D -
Steve Morse isn't just one of the world's most respected