Radial Introduces the Radial ProMS2 Single Channel Mic Splitter
Radial Engineering Ltd. is pleased to introduce the Radial ProMS2 - a single channel mic splitter designed for PA, recording and broadcast applications.
According to Radial Production Manager Steve Hopia: "Radial has been building custom mic splitters and snakes for over 20 years. More recently, the Radial OX8 has gained notoriety as the mic splitter of choice with artists as diverse as Rush and U2 when recording live performances. We felt that it was time that we made a single channel version of the OX8 that could be used for general PA applications and installations where high performance is needed at a more affordable price point. The ProMS2 delivers in spades!"
The Radial ProMS2 is completely passive and 100% discrete to ensure optimal signal flow. The engine inside is an Eclipse ET-MS10 transformer that is exceptionally linear from 20Hz to 20kHz while exhibiting less than 0.01% distortion at 20Hz. The Eclipse transformer is equipped with a mu-metal can that shields the sensitive circuit from outside electro-magnetic fields to ensure the signal is delivered without artifact.
Features include microphone input with -30dB pad to enable extra high level sources to be used without fear of saturating the transformer. There are three outputs: The first is a direct-coupled output that is normally connected to the main FOH PA system mixer and provides a return path for 48 volt phantom should a condenser mic or active DI box be in use. The second is a transformer isolated output that is particularly adept at eliminating the hum and buzz caused by ground loops. The third is a direct output with a ground lift switch. This auxiliary output can be used to feed the stage monitors, recording system or remote broadcast truck.
The ProMS2 is made in Canada using heavy duty 14 gauge steel and features an internal I-beam frame that is virtually impossible to torque. This ensures outside stress will not cause premature failure of the solder points that connect to the various components, connectors and switches. A unique book-end design creates protective zones around the connectors and switches to further prevent mishap on busy stages. The outer shell may be removed to mount inside the J-Clamp to attach the ProMS2 to a podium or several may be ganged together and mounted in the J-Rak for multi-channel installations.
The ProMS2 is now shipping.
Radial's Decoder MS (mid-side) Interface is Now Shipping
(PRESS RELEASE): Radial Engineering Ltd. is pleased to announce the Decoder, a self contained MS (mid-side) interface, is now shipping.
Radial Engineering Ltd. Announce a New Generation JDV
(PRESS RELEASE): Radial Engineering Ltd. is pleased to announce a new generation JDV with what is likely the most ambitious...
Radial Introduces the Headload Prodigy™ Combination Load Box and DI
(PRESS RELEASE): Radial Engineering Ltd. is pleased to announce the Headload Prodigy - a combination load box and DI that...
The Radial JDI Stereo Passive Direct Box is Now Shipping
(PRESS RELEASE): Radial Engineering Ltd. is pleased to announce the JDI Stereo direct box is now shipping.
According to company President...
The Radial J48 Stereo Active Direct Box is Now Shipping
(PRESS RELEASE): Radial Engineering Ltd., is pleased to announce the Radial J48 Stereo active direct box is now shipping.
Radial's Original Bassbone Updated, Introducing the Bassbone V2
(PRESS RELEASE): Radial Engineering Ltd. is pleased to announce the Bassbone V2, a second generation Bassbone that features a dedicated...
Radial Announces the StageBug SB-15 Tailbone
Radial Engineering has announced the SB-15 Tailbone - a high performance signal buffer designed to sit at the beginning of...
Radial Releases Solo and Duo Filler Panels for its 500 Series Power Racks
Radial Engineering Ltd. announces the availability of the Solo and Duo filler panels for 500 series power racks.
Radial Introduces the JR-1M and JR-1L Footswitches
Radial Engineering Ltd. introduces the JR-1 remote - a compact footswitch that is available in choice of latching or momentary...
Radial Launches the JR2-DT Desktop Remote Switch
Radial Engineering Ltd. launches the JR2-DT remote - a dual function control switch that enables the user to A/B toggle...
Radial Updates SW8 Back Tracking Switcher
Radial Engineering Ltd. has updated the SW8 backing track switcher with several new features and functions.
The SW8 is designed...
Radial Introduces the SW4 Quad Input Switcher
Radial Engineering Ltd. introduces the Radial SW4, a unique multi-channel switcher for balanced audio signals that enables four input pairs...
Radial's Relay Xo Mic Signal Switcher Unveiled
Radial Engineering Ltd. launches the Radial JX62 - a six input guitar switcher with two amplifier outputs for live touring....